Yes. Almost everything will fade over time when exposed to sunlight and other weather conditions. Forestar product is added high quality UV-inhibiting pigments and made from hardwood fibers in order to minimize the fading (softwood fades far more than hardwood), but there will still be some visible fade over first few months(the speed and degree of this fading depend on actual weather conditions) giving a more textured appearance. As with any timber based product, some fade will occur but the plastic content holds its colour. Any initial colour difference between boards is due to the natural colour variance in the wood fibers and once weathered, the boards will all be similar colour tone.

Of course. Forestar product does not absorb water, which makes it an ideal solution for area near water. Also, it can be used in marine environments since salt has no effect on it. Additionally, burring-free is a big plus for Forestar product, which can protect your bare foot.

Yes. You may use a router if you are installing a solid profile.

If Forestar product has been installed as mentioned in the Installation and Maintenance Guide, most of melt off will flow away rather than freeze. However, we recommend to use rock salt or calcium chloride for ice or snow removal. These may only leave white residue, but it can be cleaned easily by mild soap or rinsing with water.

Forestar product is wood plastic composites, made from a unique blend of recycled wood powder and plastics, combines with highly advanced manufacturing process. Forestar product is a special combination of approximately 60% hardwood fibers, almost 30% polypropylene, and the rest 10% contains high quality pigments and some other additives such as UV stability, mildew and fire resistance.

Forestar products has an appearance that is very similar to wood and works as perfect alternative to wood, but not substitute.

If it gets marked or damaged, then the scratch can be softened and blended back into the deck using either Danish or Tung Oil. Please see our                                                    for more details.